Cuenca, Alstom Citadis 302 Nr. 1001

Fotografiile sunt publicate ca atare și nu au scopul de a promova vreo poziție politică și/sau ideologică.

Toate materialele sunt furnizate de către utilizatorii acestui site și nu reflectă opinia echipei de administrare a ste-ului

Cuenca,

Alstom Citadis 302

Nr. 1001

Aeropuerto Station

Tranvia de Cuenca Alstom Citadis 302 LRV No. 1001 departing Aeropuerto Station

Construction of Cuenca’s Tranvia tramway was initiated in 2013 and after some delay was completed in 2018. In 2019 test runs using Alstom Citadis LRV units commenced but were interrupted. At the time of this photograph (March 2020) test runs had recommenced but there was no firm date for launching commercial public operations.

Autor: PeluconDFW ·

Dallas Dată: 14 martie 2020 an, Sâmbătă

Afișează locația de fotografiere pe hartă

Statistici

Licență: BY

Publicat 02.04.2020 22:58 MSK
Vizualizări — 500

Informație detaliată

Votare

Evaluare: +15

Мистер Гуй	+1
УКВЗ	+1
Алексей Краснов	+1
Alex Shcherbina	+1
focus1965	+1
I.L.	+1
Qvad	+1
Локхид	+1
вадя 2017	+1
Vladlen99	+1
Vladimir Vill	+1
Павел С	+1
Ivan Voiteshonok	+1
Timoshenkov007	+1
Ymtram	+1

Link permanent la această fotografie

Depoul:	Tramway
Livrat:	01.07.2015
Model:	Alstom Citadis 302
Anul construcției:	2015
Starea actuală:	Operațional
Funcție:	Vehicul de pasageri
23.10.2015 started test runs without passengers 09.11.2018 started runs with passengers

Setările camerei foto

Make/Manufacturer:	Canon
Model:	Canon EOS REBEL T5
Software or Firmware:	Windows Photo Editor 10.0.10011.16384
Date and Time:	14.03.2020 15:45
Exposure Time:	1/200 sec
Aperture Value:	8
ISO Speed:	100
Focal Length:	37 mm
Flash:	Flash did not fire, compulsory flash suppression mode
Metering Mode:	Pattern
Shooting Mode:	Program
Arătați datele EXIF

Comentarii · 1

03.04.2020 09:52 MSK
Link

PeluconDFW ·

Dallas

Fotografii: 24

Departing Aeropuerto Station during test running. The Alstom Citadis is a LRV family of vehicles. The type 302 five-car units operated on the Tranvia system are part of the X02 (second generation) vehicles.
Construction of Cuenca’s Tranvia tramway was initiated in 2013 and after some delay was completed in 2018. In 2019 test runs using Alstom Citadis LRV units commenced but were interrupted. At the time of this photograph (March 2020) test runs had recommenced but there was no firm date for launching commercial public operations.
The Tranvia consists of 20 stations along a 10km route which crosses the city from South East Rio Tarque Station to North East Parque Industrial Station.

https://alphayankee.smugmug.com/Urban-Tr...HPVmsxd

+1 / –0

Comentariul dumneavoastră

Vă rugăm să nu aduceți în discuție subiecte politice, altfel veți fi suspendat pentru cel puțin o lună!

Trebuie să vă conectați pentru a scrie comentarii.